swag kit vape is a target received Vaporesso the purposes of this review.
Vaporesso accent color PM80:
– Size: 121.3mm x 24.8mm x 33.8mm
– Display: OLED 0.91inch
– Capacity: 4 ml / 2 ml
– load: 2A
– Output Power: 5-80w
– Battery: 18650
In the box:
– destination device PM80 VAPORESSO
– 2 x VAPORESSO PURPOSE PM80 POD (4 ml)
– GTX mesh coil 0.2Ω
– GTX mesh coil 0.6Ω
– 2 x Airflow silicone earbud
– USB cable
– Warranty Card
– Reminder Card
Objective vaporesso gen is a device that can be used for MTL and DTL vaping.
You can buy these devices in 6 different colors, which is good for me. The device is powered by a battery 650 and operates 18 5-80w. device dimensions 121.3mm x 24.8mm x 33.8mm and previous versions of the device feels good in the hand and also very convenient to use. the quality of construction of the device is very good, everything is as it should be and there is no rattle. In the device in one hand, you can see the “target Vaporesso PM80 SE”. Obviously the package in the package, four air flow records, two balls and two coils that are really good that you will receive.
Therefore, in the package, you receive two cartridges is very good because it can always be with you both cartridges and can have other liquid in the cartridge or you can use a cartridge for MTL and one for vaping DTL, you can also send this case was broken the first , very good. The cartridge is held in place by magnets and the magnets are very good, the cartridge remains perfect on the inside. This unit is compatible with good PM80 cartridge. From the top of the cartridge, you can see the funnel and I think it is convenient to use. Capacity cartridge is a very good capacity of 4 ml. From the bottom of the cartridge can be seen when you pull the plug and socket can see the fill hole. You can fill the cartridge with the bottle gorilla without any problems. In this cartridge, you can also change the background of the coil, all you need to do is remove one and put one on the other side. So you can be fairly easy to change rolls here. Because entries must say that when the coil is used for the first time, to prepare coils with a few drops of liquid E and after that it can be placed in the coil and fill the cartridge. Typically, you will receive two coils, will receive the 0.2ohm coil clean and recommended for this 45-60w coil power, also in the package, you receive the network 0.6ohm coil, the coil is recommended 20-30W.
From the top of the camera, you can look into the magnet slots and can see the connection here. Also on the upper side of the mod you can see three holes on each side of the airflow. Typically, you receive the airflow 4 is required and you can adjust the air flow. In the device, you can see the USB port can be used to charge the battery, the device supports Charing 2A. The device is powered by a battery and can be 18,650 view battery door at the bottom of the Vaporesso GTX .
With regard to the cover of the battery, and it works well when it is placed in the battery when the device is stirred without noise. On camera, you can see the shutter button, the screen and the plus and minus buttons. the shutter button is highlighted and so far it works very well, plus and minus buttons are also very good. In this device, the screen is 0.96inch and not a color screen that some people love and someone does not like, screen brightness is all very pleasant and you can see everything on the screen. ” This device can be used 5-80w.
To activate it, you need to click 5 times on the fire button and turn it off, you must do the same. When the screen is on, you will see:
– The indicator of the percentage of battery
– Coil Resistance
– against the coup
– hojaldre time (when the shutter button is pressed)
To enter the menu, you must keep the plus and minus buttons, and enter the menu, you can see:
– Intelligent vw
In this device, one can use this mode vv meet new people and their way of working here vw smart and when you use this mode, the camera automatically adjusts the power of the coil is attached to the work.
You can lock the device when you click 3 times on the shutter button, you must do the same to unlock the device. When you lock your device can VAPE but you can not use the plus and minus buttons.
When the shutter button and press the button again to return to the screen.
Therefore, the orientation vaporesso target pm80 is available in 6 different colors.Design of this device is very good in my opinion, the same as the previous version and the build quality is good and there is nothing wrong, everything is as it should be and not hear a sound when placed on the battery. Similar in purpose from the previous version to use PM80 comfortable and feels good in the hand. This package is very good, in the end, to get more with another device, you will receive 4 air flow records, two balls and two coils that are truly amazing. Embudo convenient to use, but you can not use other tricks drop by drop here will hurt someone. 4 ml capacity is a good capacity for this device. You can fill the cartridge smoothly with gorillas and cartridge bottle remains perfectly in place. Here different screens and color display as in previous versions, but the brightness of the screen and can see everything on the screen. In this unit, you can adjust the flow of air out of the box, which can be very uncomfortable, but it is a favor that we can regulate the air flow. We can stop the flow of air on one side or both sides, you also can cut the sheets and included only one or two holes, if desired. There are plenty of airflow completely open and when air flow stops then you can actually have a good chance to MTL. With this device, you receive two rollers and the device is compatible with many rollers. For these devices, you can purchase a large head of the RBA. Therefore, this device is compatible with the 0.2ohm coil network, coil, coil 0.6ohm network, the network of coils, coil and coil 1.2ohm RBA. As I said in the previous post, I tried a lot of coils with this device and I can say that the coils were excellent. MTL coil is also very good in my opinion. It is great that you can buy or MTL coil DTL for this device and therefore the device will appeal to beginners. Good prefabricated prefabricated coil and absolutely brilliant. Create a very simple RBA head and remember that it is a starter kit for beginners can use prefabricated coil and after learning how to build and save money RBA really good. RBA season coil is also very good and the air flow in the coils of the hole is approximately 2 mm, which can be used to limit or DTL Mtl RBA vaping, perosanlly use this limit vaping coil DTL.I think this is another very good and easy zero pods device use, many coils are available and you can now use the 18650 battery which was great, me personally the device.
– Do not use drip tips
– No c USB
– Choice of colors
– Good build quality
– practical device
– 4 doses of airflow in a housing
– Two coils in the package
– Two cartridges in the package
– capacity 4 ml
– easy to fill
– cartridge nice stay in place
– a good screen brightness
– the shutter button plus and minus buttons that good
– Operation Vv
– The Intelligent mode vw
– The good taste
– Can be used as a TLD device or MTL
– The head of RBA
Materials felt good. in particular the construction of certain metals, alloy of zinc tin, but nowhere mentioned PM80 revise some time. the type of resin parts are properly applied in the car, but did not give better grip.
trigger in place. shutter button is quite small, but it was placed just below the curve inward so that it comfortably.
upper magnet unit is connected to the pod and the connector housing fits easily. It is my favorite filling pod system, as in Podstick, drag pod, press the down filling holes and filling. Do not fill the background, does not need to take the car. The disadvantage of this system is the need to fill the bottles have a hard tip for pressure and filling.
Unfortunately vaporesso luxe mod not add a special bottle to fill as they do with Podstick as super helpful.
No leakage of mass, once fulfilled when such a sweet flood peak around the capsule in the device, but the device safely. Pod important capability, particularly if a sheath is used as MTL. material of the jacket too dark to see the liquid and sheath are in the device, check the fluid level required for a nacelle is not much, but is worth mentioning that. peak runoff with a cigarette as a pleasing shape and edges drop by drop, in particular for MTL.
Not much to run I knew I on / off, switch between watts and level vaping. That’s why I think PM30 is a misnomer which should P30 or Podstick V2. LED light around the light button is fully visible under direct sunlight is hard to see though. The device is very sensitive when the rise time.
The disadvantage of this kit is no adjustment of the air flow, you need to spray on which you get. MTL coil in the types of cigarette impressions are not as loud as I want, but it’s beautiful. RDTL coil for me to be a bit limited, but
coils deployed, there are 3 reels in this kit; 1.2ohm yarn package 8-12w (MTL) 0.8ohm net 12-20w the common coil (RDTL) and 0.6ohm 20-30W net coil (RDTL).
You can buy Vaporesso kit here: https://www.vapeciga.com/collections/vaporesso