Comment of uwell pods koko Nunchaku Caliburn watch crown tank

Nunchaku uwell has sent me to check Sourcemore

 

Here is a coupon code for you to get a special offer for only $ 31.19 !! coupon code is: NCKU2M

 

 

 

What is in the box

 

  • Well nunchaku 2 mod
  • Battery sleeve
  • USB Cable
  • User’s Guide

 

 

features mod

 

  • Size: 100x29mm
  • Output: 5-100W
  • User Mode: VW, TCR bypass (Mech Mode)
  • Battery: 1x 21700, 20700 or 18650 with locking sleeve
  • Resistance Range: 0.1-3ohm (VW), 0.1-1ohm (TC)
  • Display: – Size unspecified
  • dustproof chip test / humidity
  • 2A fast charge
  • Motion sensors to make adjustments / changes mode (not the knob)

 

Design and construction quality: Uwell koko

Nunchaku using 2 different from any other mod; without handle! Conversely, the nunchaku 2 using MEMS gyroscopes to control the movement and adjustment is controlled by the inclination of the side mod. At the beginning I did not like the whole thing but this unbalanced (reluctantly) I got used. Also, once I found my perfect watts there is no need to keep fit.

 

The nunchaku has three modes: watt mode, the mode and engineering TCR. Watts variable standard mode watts to 100W, TCR to configure the TCR to be used with any hardware, and mechanical mode with fire in his battery voltage. A Pressing the shutter button three times to a menu appears.

 

This mod is five live click the button. To adjust watts click the shutter button three times and bring a menu. Press the fire button to select “Power Mode” and now can be changed hand side mod watts change up or down.

 

To enter the TCR, you must open the menu by clicking shot three times, and then tilt to select TCR. Press the shutter button and you are able to change the MOD to select the temperature. For a change of C to F, they are inclined to the right to change. Press the shutter button to confirm the temperature.

 

Uwell crown allows you to adjust the energy in the CV mode. Again, the inclination of their power of choice (60-65W work better with the coil SS316L) and press the button to select the fire.

 

Finally, adjusting the TCR. SS316L to include the coil can not reach VAPE in usual.00088-0,00094 arrangements SS316L and had to go to 0.00100 to get to work.

 

Mod for tilting Whatever the configuration change, but still prefer a good command of age. Sometimes oblique shift too much and you tilt the other way and back. It’s just sometimes hard to choose the right power / temperature without last move. On the positive side, once I found my perfect watts there is no need to keep fit.

To activate it you must click 5 times on the fire button to turn off the mod you have to do the same.

When the screen is turned on, you can see:

 

– W

– process

– coil resistance

– The battery indicator

 

To enter the menu you must click 3 times on the shutter button and the enter the menu, you will see:

 

 

– Supply Mode

– TCR Fashion

– Mech Fashion

– Factory settings

 

If you want to customize your power, you need to click 3 times on the shutter button, then you must select a power mode and after that you have to tilt the mod right to increase or left to lower watts of power. In the same way, when you enter the menu by pressing the shutter button 3 times mod must lean left or right to scroll. uwell watch works very well and once when you are used, you can customize almost everything easy and hassle.

 

Protection on these devices:

 

– Short-circuit protection

– Low-voltage protection

– Temperature Protection

– the reverse battery protection

 

 

How do these devices work and my thoughts:

Nunchaku nunchaku 2 is similar to the original. Have the same tube so that bulges toward the middle, the same shutter button and the same screen. But to fit the battery 2 21700 nunchaku slightly higher (100 mm) and width (29.9mm). A the same as the original body fits nicely in my hand curves.

 

The body is made entirely of metal; Stainless steel according to this site Well. This is a cumbersome mod itself to 141g and each battery weight and fixed deposit is inserted. Compared to other vaporizer pen, nunchaku two rather large and heavy.

 

The screen is now placed on top of the model, but still small. Shows the entire coil resistance watt mode, and battery life. Though so small, it’s still a little light. Below the screen is the power / heat. It is sensitive and tactile and comfortable that I could reach with the thumb.

 

mod simple design. He received me Iridescent (from! Favorita I) and has a bright mirror finish looks stunning. But no lines in the body design is very minimal and the mark; Well nunchaku only 2 logo at the bottom, behind mod.

 

There is a micro USB port to the mod. The battery cover on the bottom (duh!) And nice and soft yarn. The nunchaku can fit 20,700 or 21,700 batteries were large but also comes with a battery cover to adjust 18650. With 21700 battery installed absolutely no rattle, scourged by cruel.

If you like the previous version, but you want the version that you can not mod 21700 to make a mistake with this one, and in this case certainly will advise you on this.

 

 

Drawbacks:

 

– No buttons plus and minus, someone does not like, I personally really sensor because it works very well and once you get used to it not have a problem

 

 

Pro:

 

– The build quality is good

– atomizers diameter 26 mm

– good fire button

– sensors work well

– Easy to use

– comfortable to use

– Topics well

– Compatible with 21,700, 20,700, 18,650 batteries

– good screen brightness

– The board is dustproof and moisture-proof

– Given the quality of the painting of the previous model, I can tell a good painting

– No scrap when shaken mod

Overall, the kit is very good. Is a product Well, after all, I expected to be good, but in some respects even exceeded my expectations. However, there are also things I would change.

 

The second vaporizer pen watt mod fashion nunchaku is great. Watt performance mode is consistent and direct fire immediately. The fact that it takes 21700 batteries is what is needed from good to excellent. I can use to 65W for more than a day before having to recharge my batteries and can expect the same.

 

I could do without tilt adjustment. I would have preferred an adjustment knob to change the setting is more complex than it should be. It was not bad, but it’s harder than it should be and takes more time and effort.

The 0.20ohm coil is pre-installed so that I started. They taste good, but it feels “wet”. Many clouds coil 65W, but can even be pushed all the way to 80W without adverse effects. It’s too hot for me vaporizer 80W good. Unfortunately, this coil drain on me and I could not use it for more than a few days. I not impressed.

 

The 0.14ohm coil is almost equal to the taste and wet spray. 65W place too weak for this coil and can be simply pushed all the way to 80W. According Well, the coil is intended to be used by the ACE, but could not get a consistent tie. Set the typical TCR of 0.00088 to 0.00094 I do not give full steam. Adjust the temperature to 450 ° F and TCR 0.00100 steam generating power but throttles aggressive cut in 1-2 seconds raffles. Too consistent for all true do vaping.

 

 

Decision

Nunchaku 2 is an improved version of the previous model. The design of this device is similar and I like it because this mod is very comfortable to use and I really like the tube mods. good building quality mod, feels like a very dense morning. This mod, can be used up to 26 mm diameter no more outgoing atomizers for me. the previous model is only compatible with the 18650 batteries, but they changed it and is compatible with a larger battery that is really good. Because of this mod is compatible with a larger battery is slightly larger than the previous bite. shutter button is very nice and convenient to use and remember than previous models E every day, I have no problem with the shutter button, I belive that also will be very good in the future. The sensors have here works very well and you really get used quickly and once you do, you will be able to customize quickly and smoothly. This mod mod is very simple to use than many people would like. Furthermore, it was very good that this board mod dust and moisture resistant. So far, this model works well and remember how long I was using his model before belive that I use for a long time without any problems.

 

If you like the previous version, but you want the version that you can not mod 21700 to make a mistake with this one, and in this case certainly will advise you on this.

My final verdict is that, in general, Uwell Caliburn Vape is large. Tilt adjustment can be eliminated, but it was a minor inconvenience. Well thanks for trying to do something different, but sometimes it’s better to stick with what worked.

 

The ability to use 18650, 20700 or 21700 battery and surprisingly expected to see the vaporizer pen. The Uwell crown 4 tank

also includes very good, apart from mine gas leak 0.20ohm coil. And as long as you do not plan TC vaping, which 0.14ohm coil is wound so large watts.

 

From the top you can see the model and cable connection is fine here, I have no problem with my atomizers and pin here is gold plated and spring. This mod, can be used up to 26 mm diameter in atomisers without a good projection for me.

Sub mod have a battery cover and the battery cover, you can see some details that helps when you want to open the lid of the mod. Put here is really good. If the battery cover is removed, you can see the orientation of the recorded battery. As I said, this device supports 21,700, 20,700 and 18,650 batteries. Generally, you will receive an adapter to 18650 if dont’t 21,700 batteries. Personally, I really want to use the 21700 battery and think it’s great that this device compatible with battery 21700. On the back of the mod, you can see the USB port that can be used to charge the battery, and this mod support quick charge, but as usual, I suggest you use an external charger.

Before the mod, you can see the button on the screen and fire.

fire button on this unit stand out, very clicky and details that really count much in it. As the shutter button works very well. The screen of this device is small, but the brightness of the screen is very good and you can see the information on the screen without any problems.

As you can see, we have no buttons and less, but we have a sensor to be used here.

In addition, the board of this device is dust-proof and moisture proof is really good.

thanks sourcemore

You can buy the kit here: uwell pods

Leave a Reply

Your email address will not be published. Required fields are marked *