Review for vaporesso coils gen swag target GTX One renova pods luxe mod

Vapeciga mod gen the sheath flow adjustable air with a tie and the shutter button. But there’s no problem? Xros consider reviewing Vaporesso and discover.

This product comes in Vapresso type of generosity to take the exam party. other thoughts you find below are my own and are not affected by the fact that this talent.

Please note that this article may contain affiliate links that finance using the spray website Make ‘N’.

introduction
While promising vape high and tasty Xros Vaporesso pod elegant with three flow holes adjustable air. However, the market is flooded capsule of the spray type apparatus. Vaporesso Xros can stand out from the crowd? What is important is that if problems arise during the inspection of the spray device Xros Vaporesso POD.

The contents of the box
Xros filling Vaporesso
Xros Vaporesso 1x battery
mesh sheath 1x Vaporesso Xros 0.8Ω 2 ml
mesh sheath 1x Vaporesso Xros 1.2Ω 2 ml
1x USB cable C
1x user manual
packaging

container Vaporesso distinctive style, color and images reflect a range of colors chosen for the starter kit pod Vaporesso Xros. In addition, the laminated picture fills most of the front. In addition to showing the front of the key elements of Vaporesso Xros as icons. While at the back, there is a specification, the content, the compliance checker government warning logo and authenticity.

Removing the cover reveals an envelope containing the instruction manual. Low 0.8Ω together Vaporesso Xros POD preassembled with a net, sitting on a plastic insert. common plant pod Xros 1.2Ω and the C-USB cable.

manufacturing quality
Xros Vaoporesso photo Blue Sky

vaporesso swag show new is not only easy to see. But it is equally easy to use. Although rounded edges remaining pod kit Xros especially square. Therefore, Vaporesso Xros may feel a little uncomfortable to hold.

Photos showing the finished painting Vaporesso Xros with green button LED screens
However, to achieve the degree of colors includes an outer housing, a transparent finish. But at the end of the appearance as a failed work paint finish polishing metallic paint.

While Vaporesso Xros can draw drawn, playing the shutter button is perfectly positioned to take the thumb. In addition, the trigger assembly indicator LED bright enough state. In the same way, when vaped, the status LEDs indicate the charge level.

Undoubtedly the three holes adjustable air drainage is a good feature, which is easily adjustable thumb. But it can be accidentally covered by the index.

0.8Ω images mesh sheath Vaporesso Xros Pod Kit
Obviously PCTG 2 ml clear sheaths formed by either making it very easy to see the current levels of e-liquid, which is large. Despite the withdrawal of the loading hopper can be somewhat messy. Due to a particularly strong magnet, which is not suitable for thin nails Xros reassuring click.

Cut
Undoubtedly Vaporesso Xros perfect for transportation. Especially when Xros weighs 51g and dimensions of only 13 mm from front to back. Furthermore Xros is 112 mm, a width of 23 mm.

utility
Undoubtedly, this natural pods Vape offers some features tend not support a simple and easy experience Spray. However, it would be good to see the heating coil in the Vaporesso Xros function.

Battery use

Photos of the USB charging port for vaporesso target pro

https://www.vapeciga.com/products/vaporesso-target-pm80-pod-system-vw-starter-kit-80w-2000mah-4ml

With a battery capacity of 800 mAh internal battery that is good kit pod Vaporesso Xros this size. In addition to the amount of time between charges it is very good and as expected for a device of this nature. In addition to eating 0.8Ω 16 W POD networks, which Xros can last about two days, depending on the use.

Of course, this makes it perfect to exploit in stores, or supplementary injections of nicotine salt Xros Nic.

While many would be happy with the inclusion of a USB-C, said connector Xros 5V 1A charging speed.

Also, the LED load and the battery level is shown in the above Xros. When the red LED indicates the duration of 0-30% battery charging, blue LED indicates 30-70%. While green LED indicates 70-100% of the battery capacity is left.

In addition, if necessary with Xros charge if a quick spray is required, and continues to charge after releasing the stop button shot.

Fill in
Photos Vaporesso pods Xros, the funnel is removed to expose the fill port
What critical pod filling easy Xros Vaporesso and a bit uncomfortable. In addition to disclosing the joint recovery, I funnel must be removed, which may cause liquid leakage and the package finger. Reconstitution However, after removing it easy filling and suitable to replace the nozzle.

Eraser
photos show the airflow Vaporesso Xros
What is important is the design of adjustable air flow Vaporesso Xros 3 holes, allowing easy adjustment. In addition to restricting the air flow turbulence soft vaporizer it has been maintained. But the time delay automatic shooting light, less visible than others on the market. One point to note, Xros automatic dramatically improve airflow closed inhalation.

Replacement reel
Undoubtedly, adequate housing is easier to replace the reel. Moreover, not removing the starting coil and then back to the coil, the sheath simply removed and discarded. While the new charging station and let stand for 10-15 minutes.

Pod networks Xros 0.8Ω
0.8Ω photo Vaporesso sheath mattress cover Xros Kit
Xros 0.8Ω time out of a very fast network pods form Vape made delicious products from the beginning. fruits, especially coming through very well with a variety of flavor profiles are generated. But when the weather is above 28C flood coil 0.8Ω Xros suffering. Generate e-liquid being sucked through and mouth. However, the flavor and throat hit 20mg Nic salt with half the width of the open pit in controlling airflow.

Pod networks Xros 1.2Ω
1.2Ω photo Vaporesso sheath mattress cover Xros Kit
Obviously sheath is 0.8Ω network Xros winner for taste. In addition to Xros clean pod 1.2Ω good product vaporizer. 0.8Ω delicious but not mesh wrap. also they come to the throat with 20 mg of salt Nic almost nothing.

protection

Powered by a variant of the chipset Vaporesso Axon which GTX One Vape Mod Get code sheath offers the following levels of protection.

LED Indication Protection
a protective resistor around 5 flashing red
short circuit protection. Also 5 Flashing Red
No load protection. Also 5 Flashing Red
protection as robust 5 Blinking Red
low voltage protection 3 Flashing Red
load protection stops charging
Protection against shocks as 3 flashing red
automatic stop protection (8s) also flashing red 3
goals
It is fair to say that Vaporesso Xros was a problem during testing. In addition 0.8Ω flooding problem in the hot coil (28C). Thus, for e-liquid in the mouth when vaping. However, this has not prevented once the climate cooled below 28 ° C

abstract
While the market is saturated capsule capsule “pen”. Vaporesso could differentiate the cloud with the kit pod Xros. air also adjustable flow not only to make a difference in taste, but also the number of blows to the throat. In addition, the resulting flavor with a large pod Xros network and 0.8Ω Product profiles some beautiful fruits like mango and peach.

monitoring temperature performance
SS316 wire using 92 TCR (TCR TCR recording mode and set the default mode and SS SS 105), eight tried construction. 2 turns mere single coil, double coil 2 single towers, two luxury construction of a coil and two construction luxury double coil. Personally, I feel good with a TCR of 92 and no adjustment is necessary. It supports the form of advice ECC application, beta and the final version is very happy that no change there, because it works and works well. It seemed clear enough for a hot spray around 450ish correctly allows plenty of room for customization if spray to cool or heat. You can also adjust the power of the road and the amount of watts. Very well done out there

Overall it is a great player I’ve come to expect from renova zero pods click in buy. accelerator is smooth and not pulsey. It is consistent, no pinches. Thus, no complaints either and generally a very good vaporizer in the CV mode is well done there.Note the use of other
This mod using 5 Standard, click the button to turn on and turn off the fire. It has 3 touch buttons for setting and menu buttons. touch pad is automatically locked when the fire and remains locked until you click three times to shoot are so great that way can not be built or press accidentally pressed. The menu system is extensive and well done as usual with vaporesso but this is the first major change in their long mods as beta luxury and professional pole and armor. Prior to using the drill in the drop-down menu to choose which setting is selected. Now they are divided into two parts, one in which the DIY program in your area selection menu. It is very easy and intuitive. For me personally, I like the old way best because I always Atomizers feedback I change and the need to adjust the parameters and this is a step in time, but in normal use does not have to do so you may be an example of SS TC TCR 92 and save steps when moving in both directions. So overall it was well done and steps should be simpler and less expensive for the average user when the system is menu ever. mod Sage Mode as expected filled to the brim with all the ways you can think of. Having electric mode (selection of a normal hot, hard and soft), TC Ni, Ti and SS while TCR and TCR adjustable mode (2 memories). You also have the VV mode to adjust the voltage and wattage fashion curve, volts, temperature control and bypass. Basically, every mode of vaping ever here. Also they include super-player mode you seem to be the only form of power but allows the fire under 0.03 ohms and an automatic mode and they are smart, they do not really explain and personally I just let them and they do not use them, use they are for them.

Vapeciga luxe s mod gradually adjusted to 0.1 watts least 100 watts and 100 watts or more gradually completed.

If you hold the adjustment has not completely less than 100 watts and rolls and pretty fast. Overall, well done there, and quick and easy to adjust, but I’m not a fan of adding 0.1 watts more than 20 watts. Modeling itself is built solid with no rattle at all, and has a nice weight where it is not heavy, not light. It feels good in the hand. The battery cover is a magnet standard backplane and is easily accessible without damaging the battery housing and rear socket (2) 18650. Crisis reality game board without the battery and easily without the ribbon as mod poles. It is a thick metal door, but put a warning label on the battery warning and protection in the workplace plug Is well there too.

There was paint on both mod too. I do not know, I would say the cats really do not like most of the painted metal. body parts made of plastic material of good quality so thick felt a sense of lightness, but not cheap. Of course

I made a review vaporizer since the end of 2016 and has made more than 300 comments from users. I like vapers Forum and contribute to society great vaporizer. I do not “off the beaten path” reviewer. I do my best to be exhaustive, anytime and have considerable experience with many products say what is good and what is not. All modifications are tested with an oscilloscope and the test voltage and the results are displayed in my opinion.

You can buy here: vaporesso coils

https://www.vapeciga.com/collections/vaporesso

This is vaporesso gen mod swag target gtx vape zero luxe review

I received a gene vaporesso gen mod the purposes of this review.

color genes Vaporesso:

 

– dark blue

– Black

– Green black

– black purple

– Black red

– Gold

– money

 

Specifications and features:

 

– Dimensions: 93.5 x 53 x 27mm

– Display: 0.91 “OLED screen

– Battery: 2×18650 (not included)

– Power Range: 5-220W

– Charging Current: 2.5A

– Resistance Range: 0:03 ~ 5O

 

– The new chipset Axon

– 2.5A fast charging system

ECO mode Power and DIY –

– innovative mode and pulse mode TC SMART

 

In the frame:

 

– GEN MOD

– USB Cable

– User’s Guide

– User’s Guide

swag mod feeds two mod 18650 and work to 220W. set dimensions of 93.5 x 53 x 27 mm and can be said that the device is very convenient to use, especially since the rubber layer and rounded edges.

I really like the design of the MOD and I thought it was very nice, this mod is available in several different colors are very nice. On one side of the mod, you can see “Vaporesso” on the other side you can see the logo and the background mod you can see the “Gen”. mod good quality build, there is nothing wrong with the quality of the mod here and excellent resistance to scratching.

From the top you can see the relationship mod over on a good connection and do not have a problem. Here is a gold plated spring pin 510. As regards the mod is placed in the center and I believe that many desire. In this mod, you can use up to 26 mm diameter wonderful atomizers, aerosol used to use up to 25 mm diameter.

On one side of the mod, you can see the battery cover. Remnants of the battery cover in place because of the magnet and the battery cover is held in place perfectly, nothing is playing very well. At the top of the battery, you can view the location and you will use this slot to release the battery cover with your fingernail. If the battery cover is removed, you can see the battery orientation is recorded and can easily put the batteries into the mod and you can almost easy to take out the battery. Under the battery cover, you can see the sculpture “Axon Chip” and “Designed by Vaporesso”. When the battery is inserted and when the device is shaken mod can not hear the tinkling very good.

From the front of the vaporesso target , you can see the shutter button also menu buttons and less and you can see the screen and USB.

In this device, the USB port is used for software updates, but you can also use this unit to recharge the batteries is compatible with a balanced load, but as always, I recommend you charge your batteries in an external charger.
fire button fires prominent and dislocation, it works well, the knobs and buttons work well too dislocation.

To activate it, you need to click the shutter button 5 times, you must do the same to activate the mod out.

When the screen is on, you can see:

– The battery indicator
– Coil Resistance
– puff time
– W
– process

To enter the menu, you must hold the menu button or click 3 times on the menu button.
From the menu, you can see:

– Pulse Mode
– Green energy
– TC Intelligent
– DIY Fashion
– Game system
– Exit

If you choose the DIY way you can see:

– Vw
– Vt
– Vv
– CCW
– Shortcut
– Sp

If you choose the gaming system, you can see:

– against stroke
– Brightness
– Intelligent vw
– Behind the screen
– Auto eco
– default
– Version: when

At the click 3 times on the shooting button locks the keys, but you will be able to use the trigger to open the buttons you need to do the same. When you press the menu and the fire button, you can see the software version, counters and serial number.

How these devices work and my thoughts:

So gtx vape comes in several colors very good very good in my opinion. mod good build quality and everything is as it should be, and rubber coating is resistant to scratches. In my opinion mod easy to use, but remember that this mod is slightly higher, rounded edges and I like the feel of a mod.

terminal:

The pods open with the press and the sliding system that works quite well, disposable wraps so you do not worry about wearing this. I think the media system of the PTF push to complete the work as long as you do not pay more fluid at a time. 10 ml bottle filling including having stiff ends for a filler without it disorder is even easier and should give all work.

MTL: MTL Pod tried first because, as usual with MTL, he hit me, so I wanted in the first form. 1.3 Ω Coil CCELL beautiful and more enjoyable work than I expected. The taste was acceptable to guess MTL not kayfun level but funny at least.

He does not have a problem when the chain vaping is subject almost always with MTL. I use the juice 50/50 60/40 PG / VG 10 mg vaporesso zero salt and the coil is still good after 15 ml, so a good performance was IMO.

DTL Red 0.6Ω Pod and I had a pretty bad start filling the capsule with my juice of 2 mg usual and wait half an hour to give a soaked cotton. I believe, because the coil is very low and there is a mesh, cotton must be packed in there. I was right, I started the second power level and while he has no problem with little, but not much flavor. I raised my power level and increasing the little things, but not enough. The culprit here is full of cotton. Once two teeth vaped 2ml will be much better. And it gets better with the next refill 2 to the point where I do not think the same coil.

I vaped about 30 ml through the mesh coil and taste begin to decline slowly now. That damn impressive and reminds me of the old Kang secondary coil tank, also need two tanks to break, but after that they could last forever.

The only complaint DTL Pod belongs diameter drip tip is too small to attract real DTL. It is directly affected lung, but not limited DTL, which is sad because they feel a flow of air entering the coil, but drip tip acts as a bottleneck.
Button and shoot the other buttons work very well and had no problems. In this mod, you can use a 26 mm diameter atomizers which for me is more than anything. This connection is increased slightly to the right. Mod small screen and someone like that is not on the screen, we have all the necessary information and remember that you can adjust the brightness, I can say that you can see everything very well on screen. Mod support load balanced, but as I always recommend charging the batteries in an external charger.
This mod is not complicated to use and supports multiple modes of operation, I personally like how vv work, but perhaps many would like a different way of working here. I also like the choice screen shoes.
Gen mod works great, I use my Sprayers dl Mtl’m here and I want to use the preheat mode vw with normal work and the use of fashion vv far have had no problems.

Therefore, the more vaporesso luxe good mod gene that runs smoothly, the build quality is good, that supports multiple operating modes and in my opinion, the design of good mod.

The inconvenients:

– Someone may not like the color of fire button

pro:

– Good build quality
– Choice of colors
– Panel remains very good in places without playing any
– I love design
– You can adjust the brightness of the screen
– You can flip the screen
– Keep zero
– Convenient to use
– Buttons work fine
– Easy to use
– The battery indicator percentage
– atomizers to 26mm
– Modes of operation
– Load Balanced
– Mod works well

thanks Buybest

You can buy it here: Vaporesso

https://www.vapeciga.com/collections/vaporesso

 

This is vaporesso vapes gen swag mod pm80 gtx zero pod luxe kit review

vaporesso gen kit adjusted and GTX GTX 80W mod tank 22 for all ranges of coils. Delve But let us review GEN NANO for more.

These products have been sent to Vapresso kind generosity standing at the side test. other thoughts you will find below are mine and are not affected by the fact that this talent.

Please note that this article may contain affiliate links, which helped fund the site vaporizer Make ‘N’.

Introduction
While Vaporesso GTX A MTL mainly vaping kit GEN NANO open more. In addition, the internal battery and tank mod GTX 80W 22mm, users now have access to better ohm coils. As delicious 0.2Ω coil GTX. But if the tank is only VAPING DTL 22mm? What match? And for more information on this review Vaporesso generation nano.

The contents of the box
Here’s a quick breakdown of what you can expect to see included in the kit Vaporesso nano generation.

Vaporesso filled GEN NANO
1x Vaporesso generation nano Mod
1x Vaporesso NANO GEN 22 Bubble Tanks 3.5 ml (TPD 2 ml)
1x GTX mesh coil 0.2Ω
1x GTX mesh coil 0.6Ω
straight glass tube 1x
1x Bag O-ring section
1x Micro USB Type B
1x user manual
packaging

Vaporesso typical packaging style, the color of the packaging and image reflects the color options selected for vaporesso swag mod.

Although the test sample tank color containers 22 mm does not correspond to the color selection is closed. But in the final match the color. However, the image before rolling nano kit gene occupies most of the space. While the side showing the main elements of Vaporesso GEN NANO as icons. Also on the back are the specifications, content, logos warnings compliance with government auditor and authenticity.

Removing that Vaporesso GEN NANO mesh tank coil 0.2Ω and reveals cover pre-installed, seated in a plastic insert. Although not included in the review sample O-ring, glass replacement and substitution he is seated at the side mod and reservoirs. Also under the inlay it is a type B USB Microphone GTX Mesh coil 0.6Ω and manual.

manufacturing quality

Vaporesso certainly looking GEN NanoSmart and lighting kit. side panel grip dimples treated More rubber is excellent, while the color gradient in accordance with the rest of the plastic mod.

While Vaporesso GEN NANO with e-mod full tank weighs liquid will remain firmly in hand. But while I’m on the shelf to withstand everyday use. But because of the nature of the plastic, be careful not to drop the nano gene.

The important thing is the side mounted USB type B port on the side Micro load and control the easy level.

 

Naturally, as a model that is formed from a larger part of the dashboard it is nice and clean. Although the use of three buttons to operate the menu, in my opinion is not necessary and does not promote the end user experience. However, all keys and sensitive sound.

 

In addition, easy to read LCD screen with clear display. However, the design of the screen is slightly narrower and smaller readings can be difficult for people with vision problems eye.

510 connector

While holding tank happy vaporesso pm80 22 mm, 510 plates are not perfectly center.

Therefore, the overlap in the face of more than 23 mm. What is important is a good thread trimming and delicate, the center pin 510 provides a good level of rigidity. This gives confidence in the long-term use. In addition, the center pin seemed to cast about 2-3 mm, which is good to see.

GTX 22 Tank

Visual Vaporesso GTX completed 22 containers with the same tone of red mod. This is important because it is an example of the test, white gold logo turns Vaporesso cream to match the brand in the Department of Defense. Although it was a happy and more features to help the knurled adjustment and removal.

The important thing is to put the cup on top of the cover and the base wire without a problem. While the air flow control ring with a clean cut that the company slip air inlet, but it remains in position.

Cut
GEN NANO dimension Vaporesso with tanks equipped with 115mm above the support base to the top of the end of the dropwise mod. On the other hand, mod GEN NANO is 24.2mm wide and 40.3mm deep from front to back.

usefulness
Nano Gen Vaporesso burning for five, click the original fire. In addition to pressing the shutter button quickly three times to nano block genes. prevent accidental changes to settings. To unlock repeat the process.

Of course, hold the button to open the menu additional menu settings. This allows users to change the way GEN NANO freezer. But to go and save the changes to the menu button is used instead of the shutter button.

mode

As we have faster access to a different mode, now the menu. Once in the configuration menu, you have access to a variety of modes available spray Vaporesso gene. Furthermore, there is no limitation on the mode output power in watts.

Pulse mode – the default
Although designed to maximize the experience vape for pulse power output. Therefore, in theory, keep the temperature for the perfect vaporizer experience. But the effect on the vaporizer is barely noticeable.

Eco energy
It is designed to shoot automatically when the battery drops below 40%, and can withstand the force of the current. While this does not increase the battery life slightly, depending on the coil at a cost of tastes.

intelligent TC

Without a way to control the temperature probably as vaping World Marmite, you like it or not. However, when the coil of stainless steel, titanium or nickel is detected. The gtx mods can be configured to automatically switch to the temperature control mode.

DIY Fashion
DIY Spray way Vaporesso NANO GEN is the most common way.

VW – soft variable Watt, normal, high
VW strength so soon adjusted. For example, if you want a vaporizer to produce start faster and hotter and even the default power games, Navy selected the M mode is selected, the game in fixed power mode in 0.5 watt.

VV – voltage variable
As VW same method, while the watt is used to control the output. Conversely used as an output voltage of the power control method and is not fresh, normal or increased choice.

CCW – custom power curve
As well as in the selection of high-power mode is mild, normal or. However, with the use of time, the adjustment can be made watt adjustable. In addition, each curve is difficult rod watts and 0.5 watts for a particular user. Allows a more personal experience. For example, if you want you can have genes nano Vaporesso on and off at the bottom again. In addition, it can produce finer adjustment mod perfectly linear curve E-coil and a liquid flavor profile.

Shortcut
One way to protect the mod fashion mech. In addition, the coil receives the electrical output of the battery voltage.

The super player mode

Not to Vaper experienced. Furthermore, the Super player mode opens allowable range of the resistance coil. Besides 5Ω 0.15Ω resistance range it should be used by the CRT, or RDA tank mounted zero vape pod.

entire system
Throughout the system gen nano Vaporesso different menu options to offer such as screen brightness, the screen orientation and more. In addition, the choice of the system is the intelligent adjustment rather odd fashion watt variable.

VW intelligent – intelligent watt variables
There is no doubt VW intelligently seems to produce slightly warmer freezer, whatever the environment.

Battery use

While Vaporesso gen nano has 2000 mAh internal battery, battery economy is good and as expected with the inner coil. Of course, the battery life is shorter when a coil 0.2Ω GTX is used around 50W. However, with 0.2Ω coil, we can expect about 160-180 puffs between charges.

2A 5V certain load through a USB type B connector Micro. But I get Vaporesso GEN NANO for a fee to 5.12V 1.33A, which was disappointing.

However Vaporesso GEN NANO good feature is the approximate charging time. Then animated icons and battery level. On the other hand, if any charge termination GEN NANO quick spray when necessary. Then he continues to fill again after the shutter button.

fill in

Although the method of removing the filler cap on top and the whole deposit super easy in vaporesso luxe kit.

However, it can be a bit uncomfortable and would like to be the rear bayonet style or pressing the top cover. Especially in times of unscrewing the cap, the reservoir may start unscrewing. Therefore, the container must be limited as mod. This can cause the tank to screw tightly to the device, and it is difficult to remove. However, the benefits of removing the top cover is that each bottle size e-liquid can be used.

Gum

When designing the tank GTX Vaporesso 22 DTL is more suitable for vaping. Even if the flow of air can be closed to provide a much more difficult drainage, ideal for a variety of MTL coil. Apart from moving the position of the control ring smooth the air flow, the remains of a vape smooth without turbulence.
Although the use of conventional storage tanks GTX Vaporesso 22 remains as easy to change as a Vaporesso coil sheath system. In addition to changing the coil remains the method of “Plug N Play” to enter. However, it still can not change the coil with a large number of e-liquid is left. However, with the old reel, the new first coil put some e-liquid in the coil, and removing a lock down each hole. Now the new coil appear to cart and fill if necessary. In addition to leaving the coil support device for a while to ensure that adequate saturated. I prefer to let the whole 10-15 minutes, then the vaporizer.

 

You can buy here: vaporesso vapes

https://www.vapeciga.com/collections/vaporesso

 

This is vaporesso gen swag kit vape target pm80 GTX zero pods luxe mod review

swag kit vape is a target received Vaporesso the purposes of this review.

Vaporesso accent color PM80:

– blue
– Red
– Purple
– Black
– Green
– money

specification:

– Size: 121.3mm x 24.8mm x 33.8mm
– Display: OLED 0.91inch
– Capacity: 4 ml / 2 ml
– load: 2A
– Output Power: 5-80w
– Battery: 18650

In the box:

– destination device PM80 VAPORESSO
– 2 x VAPORESSO PURPOSE PM80 POD (4 ml)
– GTX mesh coil 0.2Ω
– GTX mesh coil 0.6Ω
– 2 x Airflow silicone earbud
– USB cable
– Manual
– Warranty Card
– Reminder Card

Objective vaporesso gen is a device that can be used for MTL and DTL vaping.

You can buy these devices in 6 different colors, which is good for me. The device is powered by a battery 650 and operates 18 5-80w. device dimensions 121.3mm x 24.8mm x 33.8mm and previous versions of the device feels good in the hand and also very convenient to use. the quality of construction of the device is very good, everything is as it should be and there is no rattle. In the device in one hand, you can see the “target Vaporesso PM80 SE”. Obviously the package in the package, four air flow records, two balls and two coils that are really good that you will receive.

Therefore, in the package, you receive two cartridges is very good because it can always be with you both cartridges and can have other liquid in the cartridge or you can use a cartridge for MTL and one for vaping DTL, you can also send this case was broken the first , very good. The cartridge is held in place by magnets and the magnets are very good, the cartridge remains perfect on the inside. This unit is compatible with good PM80 cartridge. From the top of the cartridge, you can see the funnel and I think it is convenient to use. Capacity cartridge is a very good capacity of 4 ml. From the bottom of the cartridge can be seen when you pull the plug and socket can see the fill hole. You can fill the cartridge with the bottle gorilla without any problems. In this cartridge, you can also change the background of the coil, all you need to do is remove one and put one on the other side. So you can be fairly easy to change rolls here. Because entries must say that when the coil is used for the first time, to prepare coils with a few drops of liquid E and after that it can be placed in the coil and fill the cartridge. Typically, you will receive two coils, will receive the 0.2ohm coil clean and recommended for this 45-60w coil power, also in the package, you receive the network 0.6ohm coil, the coil is recommended 20-30W.

From the top of the camera, you can look into the magnet slots and can see the connection here. Also on the upper side of the mod you can see three holes on each side of the airflow. Typically, you receive the airflow 4 is required and you can adjust the air flow. In the device, you can see the USB port can be used to charge the battery, the device supports Charing 2A. The device is powered by a battery and can be 18,650 view battery door at the bottom of the Vaporesso GTX .

With regard to the cover of the battery, and it works well when it is placed in the battery when the device is stirred without noise. On camera, you can see the shutter button, the screen and the plus and minus buttons. the shutter button is highlighted and so far it works very well, plus and minus buttons are also very good. In this device, the screen is 0.96inch and not a color screen that some people love and someone does not like, screen brightness is all very pleasant and you can see everything on the screen. ” This device can be used 5-80w.

To activate it, you need to click 5 times on the fire button and turn it off, you must do the same. When the screen is on, you will see:

– The indicator of the percentage of battery
– process
– Coil Resistance
– against the coup
– W
– Better
– hojaldre time (when the shutter button is pressed)

To enter the menu, you must keep the plus and minus buttons, and enter the menu, you can see:

– Intelligent vw
– Vw
– Vv
– default
– Exit

In this device, one can use this mode vv meet new people and their way of working here vw smart and when you use this mode, the camera automatically adjusts the power of the coil is attached to the work.
You can lock the device when you click 3 times on the shutter button, you must do the same to unlock the device. When you lock your device can VAPE but you can not use the plus and minus buttons.
When the shutter button and press the button again to return to the screen.

My spirit:

Therefore, the orientation vaporesso target pm80 is available in 6 different colors.Design of this device is very good in my opinion, the same as the previous version and the build quality is good and there is nothing wrong, everything is as it should be and not hear a sound when placed on the battery. Similar in purpose from the previous version to use PM80 comfortable and feels good in the hand. This package is very good, in the end, to get more with another device, you will receive 4 air flow records, two balls and two coils that are truly amazing. Embudo convenient to use, but you can not use other tricks drop by drop here will hurt someone. 4 ml capacity is a good capacity for this device. You can fill the cartridge smoothly with gorillas and cartridge bottle remains perfectly in place. Here different screens and color display as in previous versions, but the brightness of the screen and can see everything on the screen. In this unit, you can adjust the flow of air out of the box, which can be very uncomfortable, but it is a favor that we can regulate the air flow. We can stop the flow of air on one side or both sides, you also can cut the sheets and included only one or two holes, if desired. There are plenty of airflow completely open and when air flow stops then you can actually have a good chance to MTL. With this device, you receive two rollers and the device is compatible with many rollers. For these devices, you can purchase a large head of the RBA. Therefore, this device is compatible with the 0.2ohm coil network, coil, coil 0.6ohm network, the network of coils, coil and coil 1.2ohm RBA. As I said in the previous post, I tried a lot of coils with this device and I can say that the coils were excellent. MTL coil is also very good in my opinion. It is great that you can buy or MTL coil DTL for this device and therefore the device will appeal to beginners. Good prefabricated prefabricated coil and absolutely brilliant. Create a very simple RBA head and remember that it is a starter kit for beginners can use prefabricated coil and after learning how to build and save money RBA really good. RBA season coil is also very good and the air flow in the coils of the hole is approximately 2 mm, which can be used to limit or DTL Mtl RBA vaping, perosanlly use this limit vaping coil DTL.I think this is another very good and easy zero pods device use, many coils are available and you can now use the 18650 battery which was great, me personally the device.

deficiency:

– Do not use drip tips
– No c USB

Pro:

– Choice of colors
– Good build quality
– practical device
– 18650
– 4 doses of airflow in a housing
– Two coils in the package
– Two cartridges in the package
– capacity 4 ml
– easy to fill
– cartridge nice stay in place
– a good screen brightness
– the shutter button plus and minus buttons that good
– Operation Vv
– The Intelligent mode vw
– The good taste
– Can be used as a TLD device or MTL
– The head of RBA

Materials felt good. in particular the construction of certain metals, alloy of zinc tin, but nowhere mentioned PM80 revise some time. the type of resin parts are properly applied in the car, but did not give better grip.

trigger in place. shutter button is quite small, but it was placed just below the curve inward so that it comfortably.

upper magnet unit is connected to the pod and the connector housing fits easily. It is my favorite filling pod system, as in Podstick, drag pod, press the down filling holes and filling. Do not fill the background, does not need to take the car. The disadvantage of this system is the need to fill the bottles have a hard tip for pressure and filling.

Unfortunately vaporesso luxe mod not add a special bottle to fill as they do with Podstick as super helpful.

No leakage of mass, once fulfilled when such a sweet flood peak around the capsule in the device, but the device safely. Pod important capability, particularly if a sheath is used as MTL. material of the jacket too dark to see the liquid and sheath are in the device, check the fluid level required for a nacelle is not much, but is worth mentioning that. peak runoff with a cigarette as a pleasing shape and edges drop by drop, in particular for MTL.

Not much to run I knew I on / off, switch between watts and level vaping. That’s why I think PM30 is a misnomer which should P30 or Podstick V2. LED light around the light button is fully visible under direct sunlight is hard to see though. The device is very sensitive when the rise time.

The disadvantage of this kit is no adjustment of the air flow, you need to spray on which you get. MTL coil in the types of cigarette impressions are not as loud as I want, but it’s beautiful. RDTL coil for me to be a bit limited, but

coils deployed, there are 3 reels in this kit; 1.2ohm yarn package 8-12w (MTL) 0.8ohm net 12-20w the common coil (RDTL) and 0.6ohm 20-30W net coil (RDTL).

thanks Vaporesso

You can buy Vaporesso kit here: https://www.vapeciga.com/collections/vaporesso

This about vaporesso gen mod swag target gtx vape zero luxe review

I received a vaporesso gen mod for the purposes of this review.

Button and shoot the other buttons work very well and had no problems. In this mod, you can use a 26 mm diameter atomizers which for me is more than anything. This connection is increased slightly to the right. Mod small screen and someone like that is not on the screen, we have all the necessary information and remember that you can adjust the brightness, I can say that you can see everything very well on screen. Mod support load balanced, but as I always recommend charging the batteries in an external charger.
This mod is not complicated to use and supports multiple modes of operation, I personally like how vv work, but perhaps many would like a different way of working here. I also like the choice screen shoes.
Gen mod works great, I use my Sprayers dl Mtl’m here and I want to use the preheat mode vw with normal work and the use of fashion vv far have had no problems.
Therefore, the gene set is a very good kit in my opinion smooth work, the build quality is good, the support of many mods work patterns and in my opinion, the design of good mod.

 

disadvantages:

– Somebody does not like the color of the shutter button
– No c USB

vaporesso target  feeds two mod 18650 and work to 220W. set dimensions of 93.5 x 53 x 27 mm and can be said that the device is very convenient to use, especially since the rubber layer and rounded edges.

I really like the design of the MOD and I thought it was very nice, this mod is available in several different colors are very nice. On one side of the mod, you can see “Vaporesso” on the other side you can see the Mod logo and background you can see the “Gen S”. mod good quality build, there is nothing wrong with the quality of the mod here and excellent resistance to scratching.

From the top you can see the relationship mod over on a good connection and do not have a problem. Here is a gold-plated pin spring 510. As this mod is placed in the middle and I think a lot of desire. In this mod, it can be used up to 26 mm diameter lovely sprays, aerosols used to access up to 25 mm diameter.

On one side of the mod, you can see the battery cover. Remnants of the battery cover in place because of the magnet and the battery cover is held in place perfectly, nothing is playing very well. At the top of the battery, you can view the location and you will use this slot to release the battery cover with your fingernail. If the battery cover is removed, you can see the battery orientation is recorded and can easily put the batteries into the mod and can be almost easy to take out the battery. Under the battery cover, you can see the sculpture “Axon Chip” and “Designed by Vaporesso”. When the battery is inserted and when the device is shaken mod can not hear the tinkling very good.

From the front of the gtx vape, you can see the shutter button also menu buttons and less and you can see the screen and USB.

In this device, the USB port is used for software updates, but you can also use this unit to recharge the batteries is compatible with a balanced load, but as always, I recommend you charge your batteries in an external charger.
fire button fires prominent and dislocation, it works well, the knobs and buttons work well too dislocation.

To activate it, you need to click the shutter button 5 times, you must do the same to activate the mod out.

When the screen is on, you can see:

– The battery indicator
– Coil Resistance
– puff time
– W
– process

To enter the menu, you must hold the menu button or click 3 times on the menu button.
From the menu, you can see:

– Pulse Mode
– Green energy
– TC Intelligent
– DIY Fashion
– Game system
– Exit

If you choose the DIY way you can see:

– Vw
– Vt
– Vv
– CCW
– Shortcut
– Sp

If you choose the gaming system, you can see:

– against stroke
– Brightness
– Intelligent vw
– Behind the screen
– Auto eco
– default
– Version: when

At the vaporesso zero on the shot button locks the keys, but you will be able to use the shutter button to open the buttons you need to do the same. When you hold down the menu button and fire, you can see the version of the software, tokens and serial number.

My spirit:

Let me start with the atomizer, as I said, the quality of the construction of the atomizer is good and there is nothing wrong here. atomizer support points 510 falls well. It is easy to fill the tank and is present in the system works very well charge. A glass bubble tank installed capacity is a very good capacity of 8 ml. Using the spray, you receive two coils and the second coil is very well done. He felt very well in this tank and the coil as many GT4. It is very easy to adjust the airflow here and we have a lot of airflow here. Basically, this is a solid deposit ohms doing very well.
mod quality construction and everything is as it should be, and the rubber coating is scratch resistant. In my opinion mod easy to use, but remember that this mod is slightly higher, rounded edges and I like the feeling mod.

Button and shoot the other buttons worked fine and had no problems. In this mod, you can use a 26 mm diameter atomizers, which for me is more than anything else. This connection is raised slightly to the right. Mod small screen and someone like that is not on the screen, we have all the information we need and remember that you can adjust the brightness, I can say that you can see everything with an excellent display. mod support load balanced, but as always we recommend charging the batteries in an external charger.
This mod is not complicated to use and supports multiple operating modes, personally I like the way vv work, but probably many want another way to work here. I also really like the shoes selection screen.
Gen mod works very well, I use my dl aerosol Mtl here and want to use the vw start of the heating mode with normal work and the use of vv fashion so far no problem.

Therefore, the gene vaporesso kit is a very good kit in my opinion smooth work, the build quality is good, the support of many mods working modes and in my opinion, the design of good vaporesso luxe.

disadvantages:

– Somebody does not like the color of the shutter button
– No c USB

Pro:

– Orchard 510 is compatible with the drop board drop
– easy to fill
– 8 ml capacity
– Easy to adjust the air flow
– The good taste
– Good build quality
– Choice of colors
– Group remains very good in places without playing any
– the conception of love I
– You can adjust the screen brightness
– You can rotate the screen
– Maintain zero
– comfortable to use
– Button worked well
– Easy to use
– The indicator of the percentage of battery
– 26mm atomizers
– Operating mode
– Load Balancing
– Mod worked well

thanks Vaporesso

You can buy vaporesso here: https://www.vapeciga.com/collections/vaporesso

This for vaporesso vapes gen swag mod pm80 gtx zero pod luxe kit review

vaporesso gen kit come in various colors:

– Black
– Midnight Blue
– White
– money
– Green
– Red and blue

Specification:

– filling the tank capacity: 5 ml / 2 ml
– Output Watt: 5-100W
– Resistance Range: 0.03-5ohm
– Simple Battery: 21700/20700/18650
– Charging current: 2A

In the frame:

– Armor Pro Mod
– 18650 Adapter
– the baby tank CASCADE (2.5 ml)
– mesh coil (0.18O) already installed
– GT CCELL2 coil (0.3O)
– USB charging cable
– User’s guide

Cascade baby sub-ohm tank can be purchased separately in different colors:

– money
– blue
– Rainbow
– Gold
– Black
– O bright

vaporesso swag mod cascade sub-ohm baby is very similar to reservoirs cascade sub-ohms, but there are differences and different capacities.

I received a baby waterfall in black and looks good in my opinion. You can see some details on the plastic cap and can view the details of the same in the control ring airflow. In addition to air flow ring, you can see engraved “Vaporesso” and the bottom of the tank, you can see the record “Waterfall Baby” and “Designed and manufactured by Vaporesso”. Sub-ohm tank diameter is 24.5 mm, 58 mm high with a drop top, the capacity of 5 ml baby cascade, or can buy the release of 2 ml capacity TPD.

Baby Cascade equipped with advanced Delrin 510 drops 2, or a ring on it, dripping end is a very pleasant and acceptable for use. 510 can be used by other drops advanced here without any problems. dropwise high range is 10 mm, the tip diameter is 13 mm drops.
Just below the maximum fall in one piece of plastic, the parts are here to improve the system load up, locked, and because there is a possibility that the plastic pieces of the top cover openable randomly , which is very good. In the plastic, you can see the designs that will be easier to pick up the pieces and interesting. It can be unscrewed plastic but has a reverse thread. Opening the upper section, it can be seen below the metal piece and can see how the position here. Top stuffing here is very interesting and something different from the other tanks bits. For the filling, you need to take a piece of plastic and interesting and can be discarded, also on the upper deck, you can see where you have to push it open. Holes for liquid letter is fine, maybe you will have no problem to fill the tank.

waterfall tank with vaporesso pm80, this tank has a capacity of 5 ml it was very good. In the package, you receive a spare glasses if they break one.

To change or clean glass tank, open the lid and a fireplace, also we have invested thread here. One takes part in the tank ohms, you can see how the emails actual fluid passing through the coil. In this tank, it is liquid under glass under glass for the three slots in which E go down liquid and eat coil. As the manufacturer says, it would be more efficient ways of evacuation with little chance of success can produce dry. Now, you will no longer be able to see the rest of the tank can not be this way, people liquid mail, but you can always change the bottom of the tank and can see the rest of the liquid e.

Cascade baby has two coils in the package. pre-installed GT mesh coil, the coil resistance is 0.18ohm 50-85watts come with power and the recommended coil. CCELL coils accept as a replacement coil, coil resistance 0.3ohm, 35-50watts force recommended to the coil. In addition, you can buy several types of baby ohm coils cascading secondary tank:

 

– GT1 0.2ohm 50-70W
– GT2 0.4ohm 40-80w
– GT4 0.15ohm 30-70w
– GT6 0.2ohm 40-100W
– WP8 0.15ohm 50-110w
– GT CCELL 0.5ohm 20-32w

 

 

This tank is also compatible with an animal baby coil, which is a professional network.
To change the coil needs to unscrew the base, the base has a standard thread and bolt coil at the bottom. Put it here. As usual before refueling, it should be special coil with a few drops of messages rap to prevent and after a tank that can be filled and used immediately. Coils works well with liquid and use vg-pg 70-30 and leakage.

 

Based on the control ring airflow and can see some details about the ring that helps fit. ring airflow control 3 holes, you can see the airflow and here we have a cap, what is good, what does not fit on one side, there will be a partner on the other side.

How tank cascade working sub-ohm baby

First, what I want here over filling the tank, to fill the tank it is very easy and I like the fact that there is no chance you can open the possibility of charging, which just released parts plastic and boost the hand, when only fill the reintroduction of plastic parts and ready. About coils that have received the package, two coils work well. With the coil CCELL there is much less airflow, but the thread of a batch flow rolls air GT, so if you want a coil tight loop CCELL for you, but if you like a lot of airflow mesh want more coil.
steam production in very good secondary reservoir ohms to force recommended, of course, more steam coils networks, but also have more power to him. solid feel, I think it’s better with a spool of thread, but you can feel better with CCELL coil. In addition, no leakage here.
What can not like this is when you want to change the coil, for example, must have a metal part of the tank and unscrew the base, because if the glass is maintained or even a fireplace without a roof deck with the base to dump thread.
What you want here is very easy and safe without the possibility of filling can be unscrewed fine mesh spiral random system that gives the feeling of a very solid build quality was pretty good and handsome tank,

gtx mods

Pro Armor is in my opinion a very nice model, which is very subjective, but it seems incredible. Mod supports three types of batteries with adapter 18650, 20700 and 21700. The package will be 18650 battery adapter if you have a larger battery, you can use the mod works between 5-100w 18650, coil resistance that can you use is 0.03- 5ohm. mod weight 108G without battery size and mode is 38.5mm x 27mm x 86mm. You can buy the pro armor in 6 different colors, I look good in black and quality to date, no scratches on the model, the build quality is also very good.
Vaporesso armor Pro 4.0 has a board of Omni and was very fast, just 0.002s.

From the top you can see the mod stainless steel connection pleating, because here is very good and here you can see the male gold plated 510. You can see the interesting design of 510 connections and the thing is mod here will not be deleted the atomizer. You can use here all atomzier a diameter of 26 mm without false.
We have few details about the mod on both sides, you can see engraved “Armor PRO” and behind the mod you can see engraved “Vaporesso”. Also on the side mod you can see the USB port for charging and improves deivde, 2A fast charge carrier mod.
At the front of the mod, you can see the select button on the shutter button on the screen, buttons and more and less.
There was no Rales, very clicky button, it’s all here. What is interesting here is the shutter button, a large bar on the screen is the trigger, I think it’s very interesting and useful. trigger very clicky and very comfortable to use, you can press what you want, I really like the trigger. Fire Buton worked very well and missifres all. We had a nice color screen, with a lot of information here. The screen is very beautilful but the screen brightness is very low, especially when outside is because the dark bar at the top of the screen, which reduces the display brightness. When you’re inside the room, basically everything you see is very good, but when you are, could be a problem.

To activate the mod must click 5 times on the shutter button, the same you have to do when you want to disable.
When the Ministry of Defense re-watt mode, see:

– The battery indicator
– preheat mode and
– The power, which seems amazing here
– coil resistance
– against cerebrovascular accident
– Volt

zero vape pod

On the screen, you can view all the information you need, really.
To lock your device, you need to click 3 times on the shutter button, the same need to do to unlock the device. When the model is locked, you will not be able to use the plus and minus buttons, but still be able to use the shutter button and the vaporizer. When the device is locked when any button is pressed as a small screen, you will see how to unlock the device and how to turn it off. When the Department of Defense is on the screen, you can see a map and software version.
On tap again and the same fire button on the screen, you will see the clock, but after a few seconds does not use a mod that you will be able to see the clock on the screen. If you press the select button and the shutter button on the screen at the same time, you will see a version of the software, if the button is pressed simultaneously more and less show mod position to the left.
To adjust the power consumption of the plus and minus buttons and a gradual increase or decrease of 0.1 W of power, but if the button up or down as much as 1 mg maintained.
To enter the menu, you have to hold down the select button or press the Select button 3 times.

To move, you have to use more or less the button when you want to enter the submenu press the Select button to press the shutter button to exit the menu.
This mod also has no way of knowing VV as much as in SP mode, you can use the coil resistance of 0.03 ohms.
If a set of sub-menu is selected, you can change many things. First, you can set is the time you can choose between analog and digital clock, and can set the time and date. You can adjust the brightness of the screen, it was nice to have this option, but it may not be used here for display brightness in the dark even when set for maximum brightness bar. You can also reset the counter surfing and you can see the weather here and wheezing fight. You can change the subject, basically, you can change the color of the screen, you can choose between orange, green, blue, yellow and red. Then we have the smart choice, if this option is enabled, every time the foot of the new atomizer in a mod, mod will automatically adjust the power to the coil. The next option is the same as defined automatic preheating option. You can also set the time, you can set the clock when it disappears from the screen and can be adjusted between 60 min-3. Here you can see the version and the last option is the default.
Thus, in this model, we have a lot of options that I like, the menu is very good and basically can configure what you want here.

As I said, this mod is one of the vaporesso luxe kit out there, I really like how it looks, mod is very nice in my opinion. Another option you might here is pre been normal, when connected to a pre been normal when the shutter button will give you a little more power and a little fall, which means they will shoot very quickly pressed, but if you do not like, you can put gently preheating. The chip works well, the board omni 4.0 is very good, I use this mod without any problems, everything works as it should. This view is very nice with a lot of information, but I like using the shutter button is transparent to the best brightness, personally I do not care, but it would be best for you.

Mod supports three types of batteries which is perfect for me because I want to use battery mod 21700. Vaporesso pro armor is very comfortable, feels great in hand, one of the most comfortable mods out there, trust me it is very convenient to use and maintain. It is true that the model has a black screen, but I still love him because of the way he looks and all information on the screen, here we also have a lot of options and settings that personally also similar.

I think pro mod armor is very good and I r

 

You can buy it here: vaporesso vapes

 

This about vaporesso coils gen swag target GTX One renova luxe mod review

I received a vaporesso swag for the purposes of this review.

color genes Vaporesso:

– cherry pink
– Lima
– Matt Gray
– Midnight Blue
– pink gold
– money
– Black
– Gold
– Black red
– Dark blue
– Black Green
– dark purple

specification:

– Capacity of tank: 8 ml / 2 ml
– Batteries: 2 x 18650
– Output power: 5-220w
– Charging Current: 2.5A
– Display: OLED 0,91
– Performance: 0:03 – 5ohm

In the frame:

– GEN S mod
– deposit of NRG-S (8 ml)
– GT4 coil networks
– GT mesh coil
– glass additional tube (5 ml)
– 4 x O-ring
– Micro USB Cable
– User’s guide
– Warranty card

The gene set includes sub tank Vaporesso ohm and mod gen. You can buy this kit in 12 different colors were really good in my opinion. Good packaging, the package with the atomizer

Atomizer:

NRG ohm secondary reservoir is 30 mm diameter glass bubble tank and sprayer is 56 mm high with decreased fall. In the atomizer can see some detail, the top you can see an arrow where you have to push the upper deck, also at the top, you can see the details so that you can open the lid of this section, the flow of menu Air command, you can view the same details and here you can see the bottom “Vaporesso”, you can see the “NRG-S”. atomizer good construction quality and no complaints.

Atomizer equipped with a good tip falls easy to use. It is a good tip 510 drops, because if you do not like it, you can use here each end of the 510 other drops to your liking.
This is the atomizer in charge and as I said above, you can see an arrow where you need to push to see the fill hole. You can fill the sprayer is almost effortless. The complete system is working very well.
Get this glass bubble attached to the spray tank and 8 ml capacity tank capacity is good. Generally, you will receive another tank and the tank has a capacity of 5 ml capacity, which was very good again.

With the atomizer, you receive two coils. Rolls receive nets gt atomizer coil, the coil has the strength and power 50-85w 0.18ohm recommended for this coil, the coil to be received in the package is GT4 is a mesh coil and double coil, coil resistance is 0: 15 ohms and 50-75W recommended power to the coil. To atomizer, different can buy rolls are really good, you can buy: GT1, GT2, GT4, GT6, WP8, CCELL GT, GT GT4 GT CCELL2 I joined. It is important that before using the coil you need to start with a few drops of eLiquid and can fill up the tank.
Basically, you can see the air flow control ring, the ring can be seen two slots airflow. Air flow control ring, has some details used to adjust the air flow can be easily adjusted airflow here.

modification:

vaporesso target pro feeds two mod 18650 and work to 220W. set dimensions of 93.5 x 53 x 27 mm and can be said that the device is very convenient to use, especially since the rubber layer and rounded edges.

I really like the design of the MOD and thought it was very nice, this mod is available in several different colors are very nice. On one side of the mod, you can see “Vaporesso” on the other side you can see the logo and the background you can see the mod “Gen S”. Mod construction of good quality, there is nothing wrong with the quality of the mod here and excellent resistance to scratching.

From the top you can see the relationship of the MOD in a good connection and no problem. Here is a spring pin gold plated 510. As for the mod is in the center and I think many want. This mod, can be used up to 26 mm wonderful diameter aerosols, sprays use of up to 25 mm diameter.

On one side of the mod, you can see the battery cover. It remains of the battery cover in place because of the magnet and the battery cover is held firmly in place, nothing is playing very well. At the top of the battery, you can view the location and you will use this slot to release the battery cover with your fingernail. If the battery cover is removed, you can see the direction of the battery is recorded and can easily put the batteries in the model and you can almost easy to take the battery. Under the battery cover, you can see the sculpture “Axon Chip” and “Designed by Vaporesso”. When the battery is inserted into the model and when the device is shaken or could not hear the clink

From the front of the GTX One Vape Mod, you can see the shutter button also menu buttons and less and you can see the screen and USB.

In this device, the USB port is used for software updates, but you can also use this device to recharge the battery supports load balancing, but as always, I recommend that you charge your batteries in an external charger.
button fires prominent and dislocation, which were good, knobs and buttons also work well dislocation.

To activate it you must press the shutter button 5 times, you should do the same to leave mod.

When the screen is on, you can see:

– The battery indicator
– coil resistance
– Time hojaldre
– W
– process

To enter the menu, you have to hold the button on the menu or click 3 times on the menu button.
From the menu, you can see:

– Pulse Mode
– Green energy
– TC Intelligent
– DIY Fashion
– Game system
– Exit

If you choose the DIY way you can see:

– Vw
– Vt
– Vv
– CCW
– Shortcut
– Sp

If a set of systems is chosen, you can see:

– blow
– Brightness
– Intelligent vw
– Behind scenes
– Auto eco
– standard
– Version: when

At the click 3 times on the shutter button to lock the keyboard, but you will be able to use the shutter button to unlock the keys you have to do the same thing. When the menu button is pressed and fire, you can see the version of the software, symbol and serial number.

My spirit:

Let me start with the atomizer, as I said, the quality of the construction of the atomizer is good and there is nothing wrong here. atomizer support points 510 falls well. It is easy to fill the tank and is present in the system works very well charge. A glass bubble tank installed capacity is a very good capacity of 8 ml. Using the spray, you receive two coils and the second coil is very well done. He felt very well in this tank and the coil as many GT4. It is very easy to adjust the airflow here and we have a lot of airflow here. Basically, this is a solid deposit ohms doing very well.

luxe s mod good build quality and everything is as it should be, and rubber coating is resistant to scratches. In my opinion mod easy to use, but remember that this mod is slightly higher, rounded edges and I like the feel of a mod.Button and shoot the other buttons worked fine and had no problems. In this mod, you can use a 26 mm diameter atomizers which for me is more than anything else. This connection is increased slightly to the right. Mod small screen and someone like that is not on the screen, we have all the necessary information and remember that you can adjust the brightness, I can say that you can see everything with an excellent display. load balanced support for mods, but I always recommend charging the batteries in an external charger.
This mod is not complicated to use and supports multiple modes of operation, I personally like how vv work, but probably many want another way to work here. I also like the selection screen shoes.
Gen mod works great, I use my jet dl Mtl here and I want to use the start of normal heating vw with the work and the use of the vv fashion so far no problems.

Therefore, the renova zero pods is a very good kit in my opinion smooth work, the build quality is good, the support of many mods working modes and in my opinion, the design of good mod.

disadvantages:

– Someone does not like the color of the shutter button
– No c USB

Pro:

– Orchard 510 supports board dropwise
– easy to fill
– 8 ml capacity
– Easy to adjust the airflow
– The good taste
– Good build quality
– Choice of colors
– Group remains very good in places without playing any
– the conception of love I
– You can adjust the screen brightness
– You can rotate the screen
– Maintain zero
– comfortable to use
– Button worked well
– Easy to use
– The indicator of the percentage of battery
– atomizers 26mm
– Operating mode
– Load balancing
– Mod worked well

 

thanks Vaporesso

You can buy here: vaporesso coils

This review of vaporesso gen mod swag target gtx vape zero luxe

I received a target for vaporesso gen mod the purposes of this review.

 

The color of the vaporesso target

– Red
– Green
– Black
– blue
– Chocolate
– money
– Purple Silver
– Blue Silver
– Carbon fiber Silver
– money itself

specification:

– Size: 102mm x 24.8mm x 33.4mm
– Display: TFT 0.96inch
– Battery: 2000mAh
– Watt: 5-80w
– Capacity: 4 ml / 2 ml
– Filling: Micro USB 2A

In the frame:

– Battery TARGET VAPORESSO PM80
– 2 x VAPORESSO OBJECTIVES POD PM80
– GTX mesh coil 0.2Ω
– GTX mesh coil 0.3Ω
– silicone plugs air flow
– USB Cable
– User’s guide
– Warranty card
– Reminder Card

Objective swag mod is a very compact camera that can be used for MTL and vaping DTL.

You can buy this device in 10 different colors which is really good. Equipment dimensions of 102mm x 33.4mm x 24.8mm for the device feels good in the hand and very convenient to use. the development of software quality is very good, everything is as it should be and there is no rattle. In the device in one hand, you can see the “target Vaporesso PM80. “It is obvious that the package in the package, four air flow records, two balls and two coils are very nice to be accepted and can not see that often, very nice.

Therefore, in the package, you will receive two cartridges are very good because you can always carry with you both cartridges and may have a different liquid. The cartridge is held in place by magnets and the magnets are very good, the cartridge perfect stays inside. From the top of the cartridge, you can see the funnel and I think it is convenient to use. good capacity cartridge 4 ml capacity of truth for small devices. From the bottom of the cartridge can be seen when you pull the plug and socket, you can see the fill hole. You can fill the cartridge with the gorilla of the bottle without any problems. In this cartridge, you can also change the background of the coil, all you need to do is remove one and put one on the other side. So you can be fairly easy to change rolls here. Because entries must say that when the coil is used for the first time, you must prepare coils with a few drops of liquid E and after that it may be placed in the coil and fill the cartridge. Generally, you will receive two coils, receive coils GTX 0.3ohm net and coil power for this 32-45w recommended, also in the package, you will receive a net roll GTX 0.2ohm, 60W 45- recommended electric coil.

From the top of the camera, you can see the slots in the magnet and can see the connection here. Also on the upper side of the mod, you can see three holes on each side of the airflow. Typically, you receive the airflow 4 look and you can adjust the air flow.

In the device, you can see the USB port to charge the battery and the device has a battery with a capacity of vaporesso zero capacity is very good in my opinion, for small devices, but also supports 2A Charing devices.

In front of the camera, you can see the shutter button, the screen and the plus and minus buttons. shutter button is highlighted and so far it works very well, plus and minus buttons are also very good. In this device, 0.96inch our screens and this is an excellent example of the color in my opinion, because the screen looks good. This device can be used 5-80w.

To activate it you must click five times on the fire button and turn it off, you must do the same. When the screen is on, you’ll see:

– The battery indicator
– process
– W
– Best
– coil resistance
– V
– against coup
– Time Hojaldre

Therefore, the screen, you can see the information very useful. To enter the menu, you have to keep the plus and minus buttons, and enter the menu, you can see:

– Vw
– Vv
– Intelligent vw
– Hojaldre
– topics
– standard
– Exit

 

In this device, we can use this mode vv know a lot of people, and the way they work here vw smart and when this mode is used, the device automatically adjusts the power coils have joined the work. Here we can also change the color screen is very good, you can choose between green, blue and purple.

You can lock the device when you click 3 times on the shutter button, you must do the same to unlock the device. When you lock your device can gtx vape but you can not use the plus and minus buttons.

 

My spirit:

 

vaporesso luxe is available in 10 different colors.

The design of the device is very good in my opinion and the build quality is good and nothing wrong, everything is as it should be and is not heard the shot. Objective PM80 very comfortable to use and feels good in the hand. This package is very good, ultimately, get more with another device, you will receive 4 air flow records, two balls and two coils that are truly amazing. Embudo comfortable to use, but you can not use another drip tip here will be a disadvantage for someone. The capacity is good capacity of 4 ml for small devices. You can refill the cartridge without cartridge problem remains perfectly in place with the gorillas and bottles. We have color screens here are very nice and we also have the ability to change the color on the screen. This device has a built-in battery capacity of 2000 mAh capacity is very good in my opinion. Charger when the device connects to the screen you will see when the batteries are charged and this also supports charging device 2A. In this unit, you can adjust the airflow out of the box, which can be very uncomfortable, but it’s a favor we can adjust the airflow. We can stop the flow of air on one side or both sides, you can also cut the sheet and include only one or two holes, if desired. There are many airflow completely open and when air flow stops when in fact, you can have the opportunity MTL very nice. With this device, you receive two rollers and the device is compatible with many rollers. For these devices, you can buy a big head RBA. Therefore, this device is compatible with the coil 0.2ohm network, networks coil, the coil 0.6ohm networks, networks of the coil, the coil and the coil RBA 1.2ohm. I tried several coils with this device and I can say that the coils are very good. MTL coil is also very good in my opinion. It is good that you can buy or MTL coil DTL for this device and therefore the device will appeal to beginners. Tastefully prefabricated prefabricated coil and absolutely brilliant. Create the head of the RBA is very simple and remember it is a starter kit for beginners can use the prefabricated coil and after learning how to build and save money RBA really good. Season coil RBA was also very good and the air flow into the hole of the coil is about 2 mm, which can be used to limit or Mtl RBA DTL vaping wants to use this limit perosanlly coil vaping DTL. I think this product is very good and easy to use device, several coils are available and very personally the device.

 

disadvantages:

– Do not use more drip tips
– No c USB

Pro:

– Choice of colors
– Good build quality
– Compact and convenient
– 4 doses airflow inside the package
– Two coils in the package
– Two cartridges in the package
– capacity 4 ml
– easy to fill
– pleasant stay cartridge into place
– Color Display
– the shutter button plus and minus buttons that good
– Battery 2000 mAh
– operation Vv
– The intelligent way vw
– Theme Options
– The good taste
– it Can be used as a device or MTL TLD
– head RBA

vaporesso thanks

You can buy it here: Vaporesso